Slot kabini ETD34 Horizontal High Frequency PCB Mount TV Flyback Transformer 12V

I-Slot ephindwe kabini ETD34 eHorizontal eQonxileyo ePhezulu PCB Mount TV Flyback Transformer 12V Umfanekiso obonakalayo

Inkcazelo emfutshane:

Umzekelo NO.:SANHE-ETD34

I-SANHE-ETD34 sisiguquli samandla sokutshintsha i-180W laser TV, enika amandla kwimowudi yokusebenza ye-resonant.Inesakhiwo se-ER35 se-slot kabini, kunye necala elikhuselayo lokuqinisekisa umgama we-insulation phakathi kweprayimari kunye neyesibini.Iingcingo ezininzi ze-LITZ ze-Multi-strand zisetyenziswa kwisibini kwimveliso enkulu yangoku.Ikwabonisa ukunyuka kobushushu obuphantsi, ilahleko ephantsi, kunye nokuchaneka okuphezulu kokuvuza kwe-inductance.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Intshayelelo

ISANHE-ETD34 isetyenziswa ikakhulu kubonelelo lwamandla lwelaser TV.Njengoko amandla ombane we-laser emkhulu, amkela iskimu se-resonance ye-LLC kunye nokutshintsha okuthambileyo ukuze unciphise ilahleko kunye nokuphucula ukusebenza kakuhle.I-transformer inokubonelela zombini i-voltage engundoqo esebenzayo yonikezelo lwamandla kunye ne-voltage encedisayo yokusebenza efunwa yi-chip, ukwenzela ukuba isebenzisane kunye necandelo ngalinye ukuguqula umqondiso wedijithali kwingcaciso ehambelanayo ye-optical kunye neprojekthi yomfanekiso ofunekayo.

Iiparamitha

1.I-Voltage kunye nomthwalo wangoku
Isiphumo	V1	Vcc
Chwetheza iVout (V)	18	15-24
Uhlobo Lomthwalo (A)	10.5
Iimpawu zoMbane
HAYI.	IZINTO	UVAVANYO I-PIN	INGCACISO	IMIQATHANGO YOVAVANYO
1	I-inductance	5-6	380uH±10%	10KHz 1Vrms
2	I-Leakage Inductance	5-6	70uH±10%	10KHz 1Vrms
3	I-DCR	5-6	110mΩ MAX	NGE-25℃
4	I-HI-POT	I-Pri-Sec	AKUKHO IXESHA ELIFUTSHANE	AC3KV/5mA/60s
		I-Pri-Core		AC1.5KV/5mA/60s
		ISec-Core		AC1.5KV/5mA/60s

Imilinganiselo: (Iyunithi: mm) & Idayagram

Iimbonakalo

1. Isakhiwo se-ER35 se-slot ephindwe kabini, i-inductance yokuvuza phakathi kwe-winding ephambili kunye neyesibini isetyenziswa njenge-resonant inductance.
2. Igobolondo elidibeneyo lisetyenziselwa ukwahlula iprayimari ukusuka kwi-windings yesibini ukuqinisekisa umgama wokhuseleko
3. I-Peripheral tape yokukhusela ihlukanisa i-transformer kumacandelo ajikelezayo
4. I-axiliary winding ibekwe kwicala eliphambili kwi-voltage ezinzileyo

Iingenelo

1. Ukujika kwecala lesibini linxeba ngokunxuseneyo kunye neengcingo ezimbini zokukhutshwa kwamandla okuzinzileyo
2. I-Leakage inductance isebenza njenge-resonant inductance yenza lula isekethe kwaye igcine iindleko.
3. I-Shell kunye ne-peripheral tape yokugquma inika ukhuseleko oluyimfuneko kwi-transformer
4. Ukunyuka kakuhle kweqondo lokushisa kunye nokuthembeka